Ahwatukee Garage Door Repair: Garage Door Opens or Closes on Its Own

Although your garage door may be opening or closing on its own, it doesn’t mean there’s an issue like a crossover with someone else’s remote control. It is actually not uncommon for garage doors to open or close on their own. If you thought this was a very unique problem, you actually have a lot of company out there. There are many homeowners who have experienced this problem. Sure enough, sometimes it is a very easy fix. But, there are some occasions where the problem could be much more complex to deal with. Don’t worry – you won’t have to face issues with your garage door alone.

If you notice that your garage door is having an issue like this or even some other issue, don’t hesitate to contact your local garage door company. We’re sure you do not want that door to come closing down at the wrong time. If you’re in Arizona, call Ahwatukee Garage Door Repair in Ahwatukee, AZ. We’re the best garage door experts in the area.

If It’s Not a Ghost, What Is It?

There are quite a few reasons why your garage door may be acting as if it has a mind of its own. But, if you had a ghost story as the reason, you may be very disappointed if it’s proven untrue. Here are some of the most common reasons for a garage door closing or opening on its own.

  1. Your remote is faulty
    If you have a remote for your garage, you should be aware that its batteries will eventually run low and need to be replaced. But, what you may not realize, is that there are many other things that can go wrong with your remote. Even with that extra remote that you do not use, you may find that its buttons have an issue, causing it to operate your garage door without even being touched.
    Before you begin to panic and go in a frenzy because of the way your garage door is acting, remove the batteries from your remotes to see if they are the source of your problem. If the problem persists even when you have removed the batteries, your problem lies elsewhere. If you so desire, you can go ahead and call a professional garage door repair company in your area. But, you could keep checking to identify the problem on your own.
  2. There is some short in the system
    Shorts in a system is one of the most frequent cause of system errors. With your garage door, a short in the circuit can cause the door to malfunction. Try disconnecting the opener to see what happens with the door. A short in the circuit may be able to be repaired. If not, you may have some replacement of parts to do. But, this should not be an issue that takes a very long time to be rectified.
    In the meantime, you may be able to operate your garage door manually to avoid it opening and closing at random times. But, if you decide to do this, be very careful. You don’t want your garage door to come tumbling down on you for whatever reason. The best thing to do is have the situation rectified as quickly as possible.
  3. There is a problem with the circuit board
    Apart from a short in the system, there are other damages that could occur with your circuit board. In most instances, you will have to replace the circuit board. But, if this isn’t possible, you may have to get a new opener. Either way, just make sure that the solution that you are provided will completely and effectively solve the problem that you’re having.
    It could certainly end up being a waste of time and resources if you opt for a solution that is just a temporary fix for the problem you’re experiencing. If you do not have a garage door repair company that you automatically call on when you have trouble with your garage door, make sure you do your due diligence before calling for help. Finding a reputable company can make a huge difference in the service you receive.
  4. Your neighbor is on the same frequency as you or has your code
    Nowadays, this is very unlikely to be the cause of your problem. However, if both you and your neighbor have the same type of garage door and it is a much older garage door, it is quite possible. Try changing your code or the frequency you’re using for your garage door. If this is the cause of the problem, this simple fix should be all you need to rectify the situation. Otherwise, you may need the expertise of a professional to help you figure out what’s wrong as well as provide solutions.

Does Your Garage Door Have to Be Old for This to Happen?

Many people believe that because they have a brand-new device, nothing can go wrong. While it is less likely for problems to occur with newer items, it is not impossible. The same holds true for your garage door. Although it would be quite unfortunate, your garage door can be faulty even the day after installation. We hope this never happens to you. But, at the same time, we have to acknowledge that these technological devices are prone to problems at any given time.

The best way to ensure your garage door has a long lifespan is to take adequate care of it. We know that it can be very inconvenient if you have to lose service of your garage door for just one day. Can you imagine it being out of service for a week, or even longer? Sure, if something goes wrong you can operate it manually, but this is almost never advised as it can be dangerous. If you realize that there is a problem with your garage door, call an expert to take a look at it for you. That’s the best action to take!

Would you like more information about your garage door? Call Ahwatukee Garage Door Repair in Ahwatukee, AZ today!